05 Rec Kayak Seat Back, C

Three feet of Bungee Cord, 3/16 in., (sold by the foot) is included at no extra charge, a TopKayaker exclusive.

Best used as a replacement seat back system for Perception Recreational kayaks circa 2005 to date. Version C seat back fits Perception and Dagger kayaks such as the Acadia and Swifty. May fit other Perception and Dagger kayaks built both before and after the 2005 model year.

This is not a slip cover! Seat back is 14 inches high, including base, by 15.5 inches wide. The padding is sewn along the edge of the thick black plastic back panel. A Web strap loop is sewn onto the back of the seat (see version B link), with two small holes for 3/16 in. bungee cord. The base tab is approximately 9 inches wide, and slips into a long slot on the seat base bottom. (aka 17110011

The older Seat Back Version A with three tabs, the two tab 05 Rec Seat Back Version B (part number 9810070) and AirCore inflatable seat components are no longer available. If you have these older versions replace the taller B version with the Tall Back Back Band. If you have the shorter A version replace with the the Sonic Back Band or the Tall Back Back Band.

This Version C can be cut to fit the three-tab Seat Back Version A or the two-tab 05 Rec Seat Back Version B. Use your original seat back as the template (make a cardboard template as needed). Cut corners MUST be rounded.

This Version C is the best option for replacement of an AirCore seat back that has the full width slot and tab. Re-use your inflatable cushion inside the Version C back.

This is NOT a good option for the West Marine Anegada Tandem.

This Version C back support, only the C seat back, can be upgraded with the High Seat Back Kit.

See the 05 Rec Kayak Seat Back Video. PERRECTOUR DAGTOURWWREC