Sea-Lect Footbrace Height Adjuster Kit

Use the Sea-Lect Kayak Adjustable Footbrace Height Adjuster Kit to raise or lower your foot braces. Footbrace Height Adjusters allow you to move the mounting location without the need to drill new mounting holes in the hull. You can re-position the brace in a lower position if the foot peg makes contact with the underside of the kayak’s deck. You can raise or lower your foot peg to adjust for very large feet or very small feet, or to fine tune for optimal toe control. The Kayak Adjustable Footbrace Height Adjuster Kit can be drilled to accommodate difference in screw hole spaces, allowing you to swap or upgrade foot braces without the need to drill new mounting holes. Comes with 2 Height Adjusters, mounting hardware and instructions. Pre-made screw holes are at 14.5 inches on center.

A = 17.5 inches – B = 3.5 inches – C = 2 inches – D = 1 inch – E = 1/8 of an inch